Out of Stock

Out of Stock

This plug and matching socket are designed for use in EV charging cables and will mate with any J1772 specified socket/plug.


They are rated at 70A and therefore are suitable for 16 and 32 amp or higher current applications as per the IEC 61851-2001 / SAE J1772-2001 standard.  The conductors should be crimped on into the pins using a heavy-duty (eg, hydraulic) crimper.  The plug comes with the 2 resistors required for correct communication with the EV and these are pre-soldered to the integrated, water resistant microswitch.


A small padlock can be used (not supplied) to secure the plug to the car whilst charging.  The padlock shackle must have a diameter of no more than 4mm.


Plug Dimensions (mm):- 240 L, 75 H, 55 W (all with dust cap on)  Weight:- 400g

Socket Dimensions(mm):- 120L, 70H x 70W  Weight:- 245g


The plug can be disassembled with a T10 Torx driver bit (needs to be at least 35mm long) supplied with the plug only.


The plug can be supplied with pre-attached cable in various configurations - see here as well as part of an EVSE kit - see here.


The socket can be disassembled with a T10 Torx driver bit, a No 2 Phillips screwdriver and a 3mm Allen key/hex driver (none of these are included).  It can also be supplied with suitably current-rated, pre-attached wire tails in a flexible orange plastic conduit (see drop-down payment options).


The socket can also be ordered with an simple circuit that will automatically cause a standard private or public EV charge point to activate on connection.  This may be suitable for customers wishing to retro-fit a Type 1 charging socket to an existing EV that only only has, for example, a tethered 13A charging lead.  Note that the charge-point will need to have a tethered Type 1 lead or the customer will have to supply one (see here).  WARNING!  YOU MUST KNOW WHAT YOU ARE DOING IF YOU INTEND USING THIS DEVICE!  The socket tails will potentially become 220VAC LIVE as soon as the socket is connected to a charging point!  To order this option, after adding the socket to your cart, add the option ‘Auto-Switch On’ option to the cart also (and international postage if required), then check out.



Both items are IP54 rated.

Type 1 Electric Vehicle Charging Plug and Socket - 32A


All Prices Include VAT & UK Postage

Non-UK Orders must pay for additional postage

Type 1 - J1772 Plug

In Stock

Type 1 - J1772 Socket

In Stock- £55 inc P&P

2.7mm ‘Triangle’ Bit

Type 1 Plug + Cable


Please see here

Torx T10/T15 Bit

Options:

(Click on this photo for an enlarged view)

(Click on this photo for an enlarged view and dimensions)

Options:

NOTE:  The pins and sleeves in these plugs require crimping with a suitable (high power) crimper.  An 8T hydraulic crimper can be purchased on eBay for ~£30 (example image left - I make no recommendations for this particular item).

T1 Plug Spares

Pins & Dust Cap

T1 Socket Spares

In Stock

In Stock

PE (Earth), Live/Neutral and CP/PP Pins

(left to right)

CP/PP, Live/Neutral & PE (Earth) Pins

(left to right)

Before Ordering Spare Plug/Socket Contacts:

Please read the notes in the paragraph above.


Please Note: Prices are for a SINGLE PIN.

All power (L, N  & E) pins have 6mm2 (4mm diameter) conductor entry size

All signal pins (PP & CP) pins have 0.5mm2 (1mm diameter) conductor entry.

Dust Cap

Type 1 Plug

Type 1 Duosida Electric Vehicle Charging Plug and Socket Spare Parts


All Prices Include VAT and UK P&P*

The Type 1 plug is compatible with all Japanese and USA-built EVs (except Teslas) eg:-


All Nissan EVs (except the 2018-on LEAF which now uses Type 2)

Mitsubishi i-MiEV / Outlander

All Vauxhall EVs and Plug-in Hybrids

Citroen C-Zero

Peugeot Ion

All Toyota EVs and Plug-in Hybrids

Renault Kangoo / Fluence

Kia Soul (not Optima - Type 2)

Fisker Karma

Ford C-MAX Energi / Ford Focus EV

Lightning EV

Mercedes Vito E-Cell Van

MIA Electric

Toyota Prius PHEV

If your EV/PIH is not listed, please go here for up-to-date information.


Contact Us...


Email: sales@EVBitz.uk  -  Landline: 01951 200197  -  Mob: 07788 138413 


2 Hall Cottage

Isle of Colonsay

Argyll

PA61 7YT

Scotland


UK Registered Private Limited Company

I am not VAT registered so ALL PRICES INCLUDE VAT!

Latch

(now black plastic)

Options:

(Type 1 Plug price includes Torx T10 Bit)

Type 1 Socket + Wire Tails

In Stock:

Free Royal Mail/ParcelForce postage is included* which usually takes 3-4 working days from the day of dispatch within mainland UK - but, due to our location, may take as much as 7 days.



(* UK orders only - ex-UK orders must have extra postage added - please see the ‘Shipping Information’ page)