Charging Cable Repair Service


All Prices Include VAT & UK Postage

Non-UK Orders must pay for additional postage

(Please note that for tethered EVSE leads, the plug dust cap is not supplied.)


‘1P’ means single phase, ‘3P’ means three phase.  All Type 1 cables are single phase only.


If you do not know how many phases your Type 2 cable/plug is, check the cable for embossing which should show something like this:


3G2.5mm2+2xG0.5mm2’ which translates as ‘3 gang (THREE main conductors) of 2.5mm squared cross sectional area (of copper stands) for the main conductors (L, N & E) plus 2 cores of 0.5mm squared signal conductors.  In this case the cable is a single phase, 16A. 


If the cable  embossing shows ‘5G6.0mm2+1x0.5mm2’ it has FIVE main conductors (L1, L2, L3, N & E) and is, therefore, a 3 phase cable, 32A due to the much heavier 6.0mm2 main conductors.



If you are completely bamboozled, just email me for a quotation.

Please include photographs of the damage and the control box (for ID purposes).



Please note:  Goods will be returned using ParcelForce 48 hour service if over 2kg, Royal Mail 2nd Class, if under 2kg the cost of which is included in the repair fee above.


I am based on an island and all postage is subject to the whims of Poseidon - sometimes ‘the post-boat don’t sail’!

Cable Repair Options:

I can mend your charging lead should, for example, the cable need replacing...





















Harry the Dog




























Type 1 Plug

Type 2 Male Plug

Type 2 Female Plug

(Please read through this section carefully to avoid mistakes in ordering and see below for pictures of the 3 standard types of EV plug. )


There are 4 common cable repair scenarios:-


Case 1 - ‘Free Cable’ - Damaged Cable - Your damaged ‘free’ Type 2 to Type 1/2 cable simply needs only the cable replacing and the plugs are undamaged (Note: Plugs can be re-used only if they are Duosida/Dostar brand as I have replacement pins for these which cannot be re-used once removed from their cable conductors). 


So, if the plugs are by Duosida/Dostar and you want a whole new 5m cable then you should order the ‘Cable Replacement’ option from the ‘Cable Repair Options‘ payment dropdown below.  Note:  If your cable is longer than 5m, please email me for a quote to replace it.


If the plugs are not Duosida/Dostar and the cable is too badly damaged to be re-used by shortening it (see next section) then it will not be worth the cost of replacing both the cable and the plugs and you should order a new cable.


As an alternative to replacing the whole cable I can remove and reattach one of the plugs to the longer portion of un-damaged cable, assuming the resulting cable length is acceptable and, again, assuming the plugs are Duosida ones.  In this case please order the ‘Cable Shortening’ option from the ‘Cable Repair Options‘ payment dropdown below.


Case 2 - ‘Free Cable’ - Damaged Plug/s - A plug on either end of a free cable (ie either a Type 2 Male>Type 2 Female or Type 2 Male>Type 1) needs replacing.  Even if the original plug is by another maker, I can replace the damaged plug with a matching Duosida (ex-Dostar) plug which is a good compromise between cost and quality.  In this case simply order the plug type that needs replacing (ie (either ‘Type 1’, ‘Type 2 Male 1P’, ‘Type 2 Male 3P’, ‘Type 2 Female 1P’ or ‘Type 2 Female 3P’.


Case 3 - Tethered EVSE Cable/Plug - Your tethered EVSE (charging point) cable or plug needs replacing.  If the cable only needs replacing see ‘Case 1’ above.  If it is just the plug then order the relevant plug.  If you need an entire new plug and cable pair then please see here.  Obviously, the cable will need to be removed from the EVSE box and sent to me.  Instructions for doing this for the most common types of EVSE can be found here.  Obviously, I would strongly recommend that this be done by an electrician, but it is usually fully within the capabilities of a competent DIYer.


Case 4 - Portable EVSEs -  The cable and/or plugs on a portable EVSE (pEVSE, AKA ‘granny charger’) need replacing, typically due to being run over by a car.  This one is a bit more complicated so please read through the rest of this section carefully.


These devices are designed to charge an EV from a standard domestic 13A (UK) 3-pin socket. 


Some types (made by Delphi and predominantly supplied with BMW/VW/Audi vehicles but also some made by Nissan) have a thermal protection device built-in to the 13A plug and so, if the 13A plug is damaged, it is not simply a case of cutting off the old plug and fitting a new one on the end of the cable because you will find the cable to the 13A plug has more than the 3 usual wires; line (L - brown), neutral (N - blue) and earth (E - yellow/green), the others of which connect to the thermal sensing circuit in the plug. 


How do you tell if your pEVSE has a thermal sensing 13A plug or not...?  Well, if you already cut off the 13A plug, you will see there are more than 3 wires (as above).  If you have not removes the 13A plug, then look at the embossing/printing on the 13A plug’s cable sheath and you should see something like this: ‘3G2.5mm2’, which means ‘3 cores of 2.5mm2 cross-sectional area copper conductors’ for L, N & E or (for example) ‘3G2.5mm2 + 2G0.5mm2’, which means ‘3 cores of 2.5mm2 conductors (for L, N & E) plus another 2 cores of smaller 0.5mm2 CSA conductors (for the temperature signaling)’.  Some types of sensing plug have 4 wires in all, others 5 and yet others 6 (especially Delphi in the latter case).


Generally, the fee for replacing a non-temperature sensing 13A plug on a pEVSE is £60, including return postage.  The fee for a temperature sensing one is £90.  To order, select either one of the ‘pEVSE - 13A Plug 1’ or ‘pEVSE - 13A Plug 2’ options, respectively, from the ‘Cable Repair Options‘ drop-down menu below.


If it is only the EV-side plug and/or cable that is in need of replacing (rather than the 13A plug-side), you can generally proceed as for, Cases 1 or 2 above.


NOTE: If possible, before considering repair, having first ensured that all the (damaged) car-side plug pins are protected with tape and that the car is NOT connected, plug in the 13A plug of the pEVSE in question to the mains and see what the LED status lights do on the pEVSE’s control box.  Usually, if the unit indicates some sort of fault, it is likely that the electronics inside the box are defective and thus the unit is irreparable.  If the cable is otherwise in good condition (... ask yourself if you would buy it, second hand and working, for £150), you may consider posting it to me for spares whereupon I will pay you £25 for your trouble.  If the unit is a Duosida brand, then I carry complete new control units and can replace the faulty one for a fee of £120 (see ‘Cable Repair Options‘ drop-down menu below).  I can do the same to non-Duosida pEVSEs by replacing the original control box with a brand new Duosida one.  This does not affect its functionality and the Duosida box is about 1/2 the size and weight of most OEM pEVSEs.


If you have any questions or doubts about the suitability of your pEVSE for repair, please email me details (with pictures of damage and control box for identification purposes) for a considered response.


Ordering

For the above scenarios where the repair is straight-forward, please use the ‘Cable Repair Options‘ drop-down menu below to select the appropriate repair option and check out.  Once ordered, send me the cable and if it requires more than the simple cable/plug replacement already paid for, I will quote for additional work or return the cable and refund the payment bar £20 to cover my postage costs and a small fee for my time used investigating the issue.


For electrical safety reasons, EV plugs are crimped onto their cables using a special, high power crimping tool.  The crimps are, therefore, very robust and capable of handling the quite significant continuous power involved in EV charging.  This generally makes EV plug replacement impractical for the average DIYer.


However, if you have the relevant crimping tool and skills then you can just order a plug from here... Type 1, Type 2 male & Type 2 female.


Contact Us...


Email: sales@EVBitz.uk  -  Landline: 01951 200197  -  Mob: 07788 138413 


2 Hall Cottage

Isle of Colonsay

Argyll

PA61 7YT

Scotland


UK Registered Private Limited Company

I am not VAT registered so ALL PRICES INCLUDE VAT!

EV charging cables are either ‘free’, ‘tethered‘ or ‘portable EVSE‘ types.  The last is also known as a ‘Granny charger‘ or ‘Mode 2‘ cable.


Free cables have a large special EV plug at each end. 


Tethered cables are those which are permanently attached to their EVSEs (charging points) but which can be disconnected for repair relatively easily with minimal tools (see here for more information).


Portable EVSEs have 13A plug on one end connected to a control box by a short piece of cable and then have a much longer and thicker cable connecting the control box to the EV plug.


If you can get the weight of your packaged cable under 2kg, use Royal Mail’s 2nd or 1st Class ‘Signed For’ service which costs under £5  Use minimal packaging as there items are very difficult to damage in transit.  Avoid using cardboard as it is relatively heavy.  Several layers of plastic will suffice e.g. a bin liner.  Items over 2kg (packaged) should ideally be sent via Parcelforce. 


Repaired cables are returned using Parcelforce or Royal Mail depending on weight. 

13A Plug